All blasting machine purchases will require an End User Certificate (PDF) and you may also be asked for a copy of your credentials, if not already on file. Export Administration Regulations (EAR) & International Traffic in Arms Regulations (ITAR): These items are controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulation If you are purchasing this item, please either complete an EUC by navigating to the 'Other information' tab above, OR use the contact-us form to request a pre-filled EUC which you can sign and return.
When precise millisecond/microsecond timing is essential. This machine enables the user the program specific timing between each circuit.

Click Here To View:  Operations Manual


The REO PT series Sequential Blasting Machines are modern easy-to-use programmable timing machines meeting the special requirements of bench blasting operations where precise millisecond/microsecond accuracy is critical. The BM175K-10MT Blasting Machine is a manual fire machine meeting the special requirements of demolition, special effects and non-sequential blasting operations where manual firing of the cap circuits, in any order, is needed.

Programmable timing permits the blaster to take full advantage of the greater accuracies offered by the new electric detonators to achieve better fragmentation and to control ground vibration. The REO Sequential Blasting Machines allow the blaster to continue full production blasting which otherwise would be drastically curtailed if a single circuit machine were employed.

All REO PT series Blasting Machines are of solid-state capacitor-discharge design with 10 output (cap) circuits.

The REO PT series Blasting Machines fire the cap circuits one after the other sequentially at pre-selected time intervals for 1 to 999 milliseconds in 1 millisecond increments. For special requirements, timing selection increments of 100 microseconds to 10 milliseconds are offered.

The BM175 series Blasting Machines are 450 volt output models and are recommended for most applications. These models have a cable receptacle on the top panel and require an EC15 series Extension Cable and TB15 Terminal Board to connect to the detonator lead lines.

The timing intervals between circuits on the PT series Blasting Machines are selected and set independently on each of nine switches, and the selected timing may be DIFFERENT between each circuit.

Several models that bypass open circuits (BOC) are offered for BOCAR (Bypass Open Circuit Automatic Redundancy) blasting methods. Please contact the Factory for these models and for your other special product requirements.

Model : BM175-10PT

No. of
Switches: 9

No. of
Circuits: 10

Volts: 450

Energy: 9 joules

Capacity#2 80 detonators, 175 ohms per Circuit, Single Series Circuit only

Weight: 20.2 lbs. (2 kg.)

[Shipping Weight]: [23 lbs. (11 kg.)]

Size: 6.8 x 12.5 x 11.8 in.

Power: Ten 1.5 volt "D" Cells Eveready E95 or equal Source (ALKALINE) batteries


Permits initiating larger blasts while meeting stringent blasting regulations.

Helps control vibration and noise.

Improves fragmentation through accurate or improved delay blasting.

Choice of any MS interval from 1 MS to 999 MS in 1 MS increments. Microsecond timing is available on special order.

Reliable. Blasting machine will not fire or discharge until fully charged to design voltage.

Safety interlock. "Charge" and "Fire" switches must both be depressed for the blasting machine to fire. Blasting machine is rendered inactive when switches are released.

Sturdy construction for extended life.

Rugged water and corrosion resistant stainless steel case.

Environmentally sealed to operate in most weather.

Solid state circuitry assures excellent reliability and service life.

Heave-duty, long life ALKALINE batteries provide efficient and expandable power.

Fast battery change using readily available standard ALKALINE batteries. No special tools are required.

Temperature compensated circuits facilitate cold weather operation.

OPERATION (Sequential Blasting Machines)

Use of this equipment requires training in sequential blasting techniques. Contact your powder company representative for training information.

This equipment must be operated in accordance with US Federal health and safety standards, state laws, rules and other applicable statutory provisions.

SUITABILITY: Properly trained and skilled personnel must determine suitability and safety factors of each blast.

IMPORTANT: Devices such as the REO Blasting Machine Energy Testers must be used to determine the energy output of each circuit prior to each blast.

The extension cable shall not be connected to the blasting machine until the circuit wiring has been verified by approved testers, the blast is ready to be fired and area safety is assured.

After the blasting circuits have been connected to the blasting machine, depress the CHARGE switch and hold it down. When the READY TO FIRE indicator lights, depress the FIRE switch while continuing to depress the CHARGE switch. Unless the CHARGE and FIRE switches are operated together, the machine will not fire. The CAP CIRCUIT indicators, when lit, indicate the probability that a circuit fired. The machine will stop firing at an open circuit, except -BOC series Blasting Machines which continue sequencing even if a circuit is open.



A lighted READY TO FIRE indicator confirms that the battery power was sufficient to charge the capacitors to the design voltage and the safety circuit is released.

The amount of time it takes for the READY TO FIRE indicator light to illuminate reflects remaining battery life. After months of use, a longer charge time will be required. However, regardless of battery condition, the full design voltage is present and the unit's safety circuit is released if the READY TO FIRE indicator is illuminated.
BM175-10 series Up to 450 charges


Blasting machine cannot be fired until the design voltage is verified and the safety circuit is released.

Case is sealed against moisture and dust.

Padlock latch on a hinged cover provides a means to increase security protection

Capacitors are shunted until the "Charge" switch is depressed.

Blasting circuits are shunted until the "Fire" switch is depressed.

Cable receptacle is protected by the cover.

No exposed terminals.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© 2022 Blasters Tool & Supply Co., Inc, All Rights Reserved.