HBR1 Scorpion SolidState Electronic NonElectric Initiator
$415.80
Item
73689
All blasting machine purchases will require an End User Certificate (PDF) and you may also be asked for a copy of your credentials, if not already on file. Export Administration Regulations (EAR) & International Traffic in Arms Regulations (ITAR): These items are controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulation If you are purchasing this item, please either complete an EUC by navigating to the 'Other information' tab above, OR use the contact-us form to request a pre-filled EUC which you can sign and return.
HBR1
Scorpion SolidState Electronic NonElectric Initiator
Mechanical
Size - 3"W x 1.5"D x 4"H (7.6cm W x 3.81cm D x 10.13cm H)
Weight - 15 oz. (.42kg)
Color - Black
Hardware - HD Black Nylon
Case Features - Waterproof, Impact Resistant, Rugged Compact design, Pushbutton Switch Protectors, Replaceable STC, Easy 1 Step Battery Compartment
Power Source - Alkaline Heavy Duty 9V
Operation - Dual Pushbutton
Electrical
Output Voltage - 2,500 VDC
Output Energy - 0.5 Joules
Firing Capacity - 1 NonElectric Tube
Connection - STC (Shock Tube Connector)
Ready Indicator - High Intensity LED
Charge/Fire Cycle - 2 seconds
STC Connection: DO NOT connect tubing until ready to initiate. Insert tubing into the topcenter neck of the STC. Insert tubing
until it firmly seats over, and completely envelops, the STC electrode. DO NOT attempt to initiate the NonElectric tubing if the
STC electrode is not inserted fully into the tubing. Plug the STC into its socket located at the top and center of the HBR1.
To Operate: When prepared to initiate, depress and hold the ARM pushbutton located on the left front of the HBR1. The
READY LED will illuminate with a steady on state. While maintaining pressure on the ARM pushbutton depress the
CHARGE/FIRE pushbutton located on the front right of the unit for approximately 1 to 2 seconds. The READY LED will change
to a blinking state to indicate a ready status. While maintaining pressure on the ARM pushbutton, release pressure on the
CHARGE/FIRE pushbutton. The STC will fire.
To Abort: At any time release pressure on the ARM pushbutton before either depressing or releasing pressure on the
CHARGE/FIRE pushbutton. The HBR1 will internally discharge and be rendered safe.
NEVER use the HBR1 as an alternate energy source on equipment for which it was not designed.
Never use a damaged or questionable machine. EIT Corporation repairs all units which it produces.
Features:
Belt loop attachment
Scorpion SolidState Electronic NonElectric Initiator
Mechanical
Size - 3"W x 1.5"D x 4"H (7.6cm W x 3.81cm D x 10.13cm H)
Weight - 15 oz. (.42kg)
Color - Black
Hardware - HD Black Nylon
Case Features - Waterproof, Impact Resistant, Rugged Compact design, Pushbutton Switch Protectors, Replaceable STC, Easy 1 Step Battery Compartment
Power Source - Alkaline Heavy Duty 9V
Operation - Dual Pushbutton
Electrical
Output Voltage - 2,500 VDC
Output Energy - 0.5 Joules
Firing Capacity - 1 NonElectric Tube
Connection - STC (Shock Tube Connector)
Ready Indicator - High Intensity LED
Charge/Fire Cycle - 2 seconds
STC Connection: DO NOT connect tubing until ready to initiate. Insert tubing into the topcenter neck of the STC. Insert tubing
until it firmly seats over, and completely envelops, the STC electrode. DO NOT attempt to initiate the NonElectric tubing if the
STC electrode is not inserted fully into the tubing. Plug the STC into its socket located at the top and center of the HBR1.
To Operate: When prepared to initiate, depress and hold the ARM pushbutton located on the left front of the HBR1. The
READY LED will illuminate with a steady on state. While maintaining pressure on the ARM pushbutton depress the
CHARGE/FIRE pushbutton located on the front right of the unit for approximately 1 to 2 seconds. The READY LED will change
to a blinking state to indicate a ready status. While maintaining pressure on the ARM pushbutton, release pressure on the
CHARGE/FIRE pushbutton. The STC will fire.
To Abort: At any time release pressure on the ARM pushbutton before either depressing or releasing pressure on the
CHARGE/FIRE pushbutton. The HBR1 will internally discharge and be rendered safe.
NEVER use the HBR1 as an alternate energy source on equipment for which it was not designed.
Never use a damaged or questionable machine. EIT Corporation repairs all units which it produces.
Features:
Belt loop attachment
Write Your Own Review