ANTI-STATIC HOSE 1.25"ID X 100' (31.75mm x 30.48M)

$811.20
Item
17229-100
ANTI-STATIC HOSE 1.25"ID X 100' (31.75mm x 30.48M)

CONSTRUCTION

Construction

Specially-formulated anti-static PVC compound.

FEATURES

Features

  • Conductivity - effectively limits build-up of static electricity; provides path for its safe dissipation to ground.
  • Bleeds off static charges built up during pneumatic loading of Ammonium Nitrate/Fuel Oil mixtures.
  • Sufficient resistance - guards blasting circuit against stray electrical currents.
  • Wear resistance - smooth interior and exterior surfaces, combined with tough material formulation, provide good wear resistance.
  • Self-extinguishing characteristics.
  • Excellent flexibility - sufficiently flexible to handle easily, yet rigid enough to reach upwards into collars of steeply-inclined holes.
  • Easily identifiable - co-extruded continuous orange stripe makes tubing visible in underground lighting.
  • Embossed branding - provides lasting identification.
  • Packaged for ease of handling and shipping.
  • Phthalate Free!

APPLICATIONS

Application

  • Bulk unloading of ammonium nitrate/fuel oil blasting agents in small diameter holes.
  • Successfully used for years with Oricas blast hole chargers, intermediate loaders and the Penberthy Anoloader.
  • Mining and construction site blasting.

SERVICE TEMPERATURE RANGE

Service Temperature [Min]

-30 ºF-35 ºC

Service Temperature [Max]

150 ºF65 ºC

NOMINAL SPECIFICATIONS

Size Code

20

Inside Diameter

1 1/4 in32 mm

Approx. O.D.

1 5/8 in41 mm

Max. W.P

120 psi0.83 MPa

Approx. Wt. per 100 ft.

55 lb

Approx. Mass per 100 m

78 kg

Length/Coil

100 ft30 m

SPECIFICATIONS

Brand

Kuri Tec®

Series

K7000

Industry Standards/Certifications

Phthalate Free

Type

Tubing

Style

Mining and Construction Anti-Stat Blasting Tubing

Material

PVC

NOTE

Note

A new coil of tubing can have its pliancy restored by the application of heat before it is placed in service underground. This will facilitate handling and its attachment to pneumatic loading equipment. Steam or very hot water passed through the coiled tubing will remove the "set" from the new tubing and allow it to be straightened easily. The tubing should then be left to cool in the straight position.

COMPLIANCE FOOTNOTES

Compliance Footnotes


© 2024 Blasters Tool & Supply Co., Inc, All Rights Reserved.