ANTI-STATIC HOSE 5/8" X 200' (15.875mm x 60.96M)

$572.80
Item
17566-200
ANTI-STATIC HOSE 5/8" X 200' (15.875mm x 60.96M)

Construction

Specially-formulated anti-static PVC compound.

Features

Features

  • Conductivity - effectively limits build-up of static electricity; provides path for its safe dissipation to ground.
  • Bleeds off static charges built up during pneumatic loading of Ammonium Nitrate/Fuel Oil mixtures.
  • Sufficient resistance - guards blasting circuit against stray electrical currents.
  • Wear resistance - smooth interior and exterior surfaces, combined with tough material formulation, provide good wear resistance.
  • Self-extinguishing characteristics.
  • Excellent flexibility - sufficiently flexible to handle easily, yet rigid enough to reach upwards into collars of steeply-inclined holes.
  • Easily identifiable - co-extruded continuous orange stripe makes tubing visible in underground lighting.
  • Embossed branding - provides lasting identification.
  • Packaged for ease of handling and shipping.
  • Phthalate Free!

Applications

Application

  • Bulk unloading of ammonium nitrate/fuel oil blasting agents in small diameter holes.
  • Successfully used for years with Oricas blast hole chargers, intermediate loaders and the Penberthy Anoloader.
  • Mining and construction site blasting.

Service Temperature Range

Service Temperature [Min]

-30 ºF-35 ºC

Service Temperature [Max]

150 ºF65 ºC

Nominal Specifications

Brand

Kuri Tec®

Series

K7000

Size Code

10

Inside Diameter

5/8 in16 mm

Approx. O.D.

55/64 in22 mm

Max. W.P

120 psi0.8 MPa

Approx. Wt. per 100 ft.

17.5 lb

Length/Coil

200 ft61 m

Industry Standards/Certifications

Phthalate Free

Type

Tubing

Style

Mining and Construction Anti-Stat Blasting Tubing

Material

PVC

Compliance Footnotes

Compliance Footnotes

  • Phthalate Free - Manufactured from all phthalate free materials

Note

Note

A new coil of tubing can have its pliancy restored by the application of heat before it is placed in service underground. This will facilitate handling and its attachment to pneumatic loading equipment. Steam or very hot water passed through the coiled tubing will remove the "set" from the new tubing and allow it to be straightened easily. The tubing should then be left to cool in the straight position.
© 2024 Blasters Tool & Supply Co., Inc, All Rights Reserved.