CD1500-10J SINGLE CIRCUIT MACHINE

$1,175.00
Item
14854
CD1500-10J SINGLE CIRCUIT MACHINE

CLICK HERE TO DOWNLOAD SPEC SHEET

Model No.: CD1500-10J
Energy Output: 1500 Volts / 10 Joules
Capacity: 382 Ohms
(185 Electric Blasting Caps)
Capacity Parallel Series: Not recommended
Weight: 3.7 lbs.
Size: 9” x 8” 3.4”
Power Source: Twelve 1.5 volt “D” cell Batteries


FEATURES:
- Solid-state circuitry assures excellent reliability and service life
- Safety Interlock.
- Sturdy construction for extended service life.
- Rugged water and environmentally sealed to operate in most weather.
- Heavy-duty, long life, ALKALINE batteries provide efficient and dependable power.
- Fast battery change, temperature compensated circuits facilitate cold weather operation.


OPERATION:
- This equipment must be operated in accordance with US Federal health and safety
standards, state laws, rules and other applicable statutory provisions.
- Devices such as the REO Blasting Machine Energy Testers must be used to determine
the energy output of each circuit prior to each blast.
- After the lead lines have been connected to the blasting machine, depress the CHARGE
switch and hold it down.
- When the READY TO FIRE indicator lights, depress the FIRE switch while continuing
to depress the CHARGE switch. Unless the CHARGE and FIRE switches are operated
together, the machine will not fire.


BATTERY LIFE: UP TO 400Charges
- A lighted READY TO FIRE indicator confirms that the battery power was sufficient
to charge the capacitors to the design voltage and the safety circuit is released.
- After months of firing cycles, a longer charge time will be required. However, regardless of
battery condition, the full design voltage is present and the unit's safety circuits are released if
the READY TO FIRE indicator is illuminated

© 2024 Blasters Tool & Supply Co., Inc, All Rights Reserved.