BTS 63 Piece Non-Magnetic Tool Kit w/ Tactical Molle Pouch-1

$5,562.20
Item
80600-63
Berry Compliant / Housed in high quality USA Made Molle Pouch with individual pockets for each tool
Berry Compliant / Housed in high quality USA Made Molle Pouch with individual pockets for each tool.

Ampco Non-Sparking, Non-Magnetic and Corrosion-Resistant Hand Tools conform to Federal, GSA,
Military, as well as other international standards. Non-sparking or intrinsically safe tools are required
and/or recommended many Federal agencies including OSHA, the Department of Energy (DOE), the
National Fire Protection Association (NFPA), and the Mine Safety and Health Administration (MSHA),
National Institute for Occupational Safety & Health (NIOSH) and Supervisor of Shipbuilding & Repair
(SUPSHIP) to name a few.

All tools are contained in 100% made in the USA tactical backpack.  Backpack provides molle
webbing on outside and attached insert with individual pouches for each tool.

Kit includes the following Tools:
 
1  * Hand Chisel 3/4", 6" OAL
2  * Snips Tin 2" Cut Length
3  * Knife Putty 3/4" Stiff Blade
4  * Knife Common 3-1/8" Blade
5  * Tweezer 5-3/4" OAL
6  * Pick/Probe 3/8x10"L
7  * Saw Hack With Blade
8  * Saw Hack Replacement Blade
9  * Brush Scratch Shoe Handle
10 * Brush Scratch Toothbrush Handle
11 * Wrench Pipe Bronze 8" OAL
12 * Wrench Adjustable 6" OAL
13 * Wrench Adjustable 8" OAL
14 * Wrench Combination 3/8"
15 * Wrench Combination 7/16"
16 * Wrench Combination 1/2"
17 * Wrench Combination 9/16"
18 * Pliers Needle-Nose 7" OAL
19 * Pliers Diagonal Cutting 7" OAL
20 * Pliers Adj Combination 6-1/2"L
21 * Pliers Lineman's 8-1/2" OAL
22 * Pliers Groove Joint 10" OAL
23 * Crate Opener 1-3/8" Claw9"OAL 
24 * Hammer Ball Peen .75lb 11"OAL
25 * Hammer Scaling 1lb 11" OAL
26 * Standard Screwdriver, 5/16" Tip
27 * Standard Screwdriver, 5/16" Tip  
28 * Standard Screwdriver, 3/8" Tip
29 * #1 Phillips Screwdriver
30 * #2 Phillips Screwdriver
31 * #3 Phillips Screwdriver
32 * Screwdriver Offset 3/8"
33 * Spatula, 10.25
34 * Clamp - .75"x.75"x3" 
35 * Scraper 2" Blade 12" OAL
36 * Flat File
37-38 * Ratchet 1/4"x5" (2)
39-40 * Extension Bar 1/4"x4" (2)
41-50 * Sockets (SAE) - 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16
51-63 * Sockets (Metric) - 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

AMPCO Beryllium Free Tools are backed with a Lifetime Warranty and are approved by Factory Mutual for use in hazardous environments.

In general, Non-Sparking Tools should be used in any environment where ignition sources are a concern. Applications include, but not limited to:

  • Maintenance and Repair Operations (MRO)
  • Collection, Holding and Transfer (CHT)
  • Hot Work
  • Work in Confined Space
  • Transportation (airports, railroads, tanker trucks, shipyards), Chemical, Petrochemical and Gas Operations
  • Military
  • City, State and Federal Governments (utilities, waste management, Hazmat, WMD)
  • General Dust Environments (grain, mining, paper/pulp mills)
Write Your Own Review
You're reviewing:BTS 63 Piece Non-Magnetic Tool Kit w/ Tactical Molle Pouch-1
© 2022 Blasters Tool & Supply Co., Inc, All Rights Reserved.