S-412 SINGLE CIRCUIT MACHINE

ELECTRIC INITIATION FIRING ENERGY: 400 VDC @ 12.0 Joules FIRING CAPABILITY: Electric Blasting Caps, NE STC-P, Electric Breech FIRING CAPACITY: 240 Ohms* *circuits requiring minimum 1.5A @ 20mJ/Ohm of resistance Locked out unless full charge is available FIRE CIRCUIT: ARMED INDICATOR: High visibility red LED, Haptic Vibration alert LEAD LINE CONTINUITY DETECTION Automatic & immediate indication of circuit DETECTION: TEST SIGNAL: < 0.18mA (0.00018A), Fuse Protected INDICATION: High visibility green LED NON-ELECTRIC INITIATION FIRING CAPACITY: 1 Non-Electric Shock Tube Line Binding Post Adapter (Sold Separately) CONNECTION: STC TYPE: EIT NE STC-P (Exterior Tube, Electric Discharge) SAFETY OUTPUT: Binding Posts shunted internally ABORT: Safe internal discharge when ‘Charge’ switch is released before ‘Detonate’ FIRING: Requires sequenced 2 switch operation CONTINUITY: Indicator immediately disengages during Charge/Fire operation MECHANICAL DIMENSION: 3” wide x 1.5” thick x 4” high (7.6cm x 3.8cm x 10.1cm) WEIGHT: 15 oz w/battery (425g) CASE MATERIAL: HD Urethane HARDWARE: Brass, Nylon, Rubber INGRESS: IP 68 (3m) OPERATING TEMP: STORAGE TEMP: Tested -20°F - 140°F (-29°C - 60°C) Tested -45°F - 180°F (-42°C - 82°C) COLORS: Black, Yellow, Tan, OD Green POWER SOURCE BATTERY: Replaceable 9V (HD alkaline recommended) LIFE: ~250+ Charge/Fire Cycles typical FEATURES CONNECTION: SWITCHES: CARRYING: BATTERY: EIT’s quick-connect HD Output Binding Posts Switchguard protected, rugged waterproof boots Dual attachment points for belt loop or lanyard Battery loads smoothly through side of unit and is secured in place by easy-on/o? battery cap WARRANTY: Lifetime warranty against manufacturing defects